Spool Dock

The Spool Dock was designed to blur the line between modern home decor and electronic accessory. Crafted in the USA from sustainable North American white oak, merino wool felt and a weighty metal base, Spool Dock is a sophisticated, contemporary charging dock for iPhone 6, 6 Plus, 5, 5s, 5c, as well as the iPad mini and 5th generation iPod touch. Unlike most other docks, Spool Dock also functions as a cable manager and allows users to swivel docked devices with the touch of a finger.
Place your Spool Dock on a smooth surface with the notch in the base pointing the direction you want the cable to go and press down firmly.

 Lift off the wooden spool portion of the dock leaving the metal base.

 Thread your Lightning Cable though the under side of the wooden spool.

Pull the connector through to the top side of the dock. Turn it 90 degrees and connect your device. Using your device, push the connector down and at a slight angle into the slot perpendicular to the one you threaded the cable through. It may be helpful to remove the support bars while doing so.


Pull the length of the cable through the gap in the trunk of the spool and in between the notch in the base and snap closed.

 Rotate the spool at least one-half turn or until the cable reaches the desired length. Turn the spool in the opposite direction and pull to let cable out.
 Swivel device as desired. 
Take out the support bars and turn them around to increase the space to accommodate a case.
Clean suction pads with a damp cloth and let dry to restore suction.